Table of Contents
Advertisement
dot1x vlan dynamic enable
dot1x vlan dynamic enable
Enables IEEE 802.1X VLAN-based authentication (dynamic).
Input format
To set information:
dot1x vlan dynamic enable
To delete information:
no dot1x vlan dynamic enable
Input mode
(config)
Parameters
None
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
All IEEE 802.1X settings take effect when the
command is set.
2.
See Table 22-1 Configuration commands and IEEE 802.1X authentication modes for
the authentication mode in which the command's settings are operable.
3.
When you set the
you also set the
4.
When the
VLAN-based authentication (dynamic) functionality is enabled.
5.
If at least one of the following commands is set for a Switch, this command cannot be
set:
410
dot1x vlan dynamic enable
aaa authorization network default group radius
dot1x vlan dynamic enable
authentication multi-step
dot1x authentication
mac-authentication authentication
web-authentication authentication
web-authentication user-group
dot1x system-auth-control
command, it will take effect only if
command has not been set, none of the
command.
Advertisement
Table of Contents
