name
Sets the name that will be used to identify the ring.
Input format
To set information:
name
To delete information:
no name
Input mode
(config-axrp)
Parameters
<Name>
Sets the name that will be used to identify the ring.
1.
2.
Default behavior
is set.
Null
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None
Related commands
None
<Name>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
Specify a character string that is no more than 32 characters. For details about
the characters that can be specified, see Specifiable values for parameters.
name
225