logging trap
Sets the priority of the log information to be sent to the syslog server.
Input format
To set or change information:
logging trap {
To delete information:
no logging trap
Input mode
(config)
Parameters
<Level>
{
Select either a level or a keyword as the priority of syslog messages.
1.
2.
Level
1
2
3
4
6
7
Default behavior
information
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
<Level>
|
<Keyword>
|
}
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
The following table describes the priorities that can be set. Note that if a level is
specified, information is displayed with the keyword.
Keyword
fatal
critical
error
warning
information
debugging
(priority level 6) is used.
<Keyword>}
Description
Immediate action required.
Critical state
Error state
Warning state
Message reporting information
Message displayed during debugging only
logging trap
645