mac-authentication max-timer
mac-authentication max-timer
Sets the maximum connection time.
Input format
To set or change information:
mac-authentication max-timer {
To delete information:
no mac-authentication max-timer
Input mode
(config)
Parameters
<Minutes>
{
Sets the maximum time (in minutes) an authenticated terminal is allowed to be
connected. After a successful authentication, if the period of time set by using this
command elapses, the authentication is canceled automatically.
If
infinity
1.
2.
Default behavior
Authentication is not canceled.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
All MAC-based authentication settings take effect when the
system-auth-control
2.
See Configuration commands and MAC-based authentication modes for the
authentication mode in which the command's settings are operable.
3.
If the value for the maximum connection time is decreased or increased, the previous
setting is applied to terminal that is currently authenticated, and the setting values
take effect only from the next login.
4.
The connection time for MAC-based authentication does not use the time of a Switch.
Accordingly, if the date and time is changed by using the
command, the connection time is not affected.
526
| infinity}
is set, there is no limit on the connection time.
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
10 to 1440 (minutes) or
command is set.
<Minutes>
| infinity}
infinity
mac-authentication
set clock
operation