spanning-tree portfast bpduguard default
spanning-tree portfast bpduguard default
Sets the BPDU guard functionality to be used by default. This command is valid for all ports
on which the PortFast functionality of PVST+, single spanning trees, and multiple spanning
trees is set.
Input format
To set information:
spanning-tree portfast bpduguard default
To delete information:
no spanning-tree portfast bpduguard default
Input mode
(config)
Parameters
None
Default behavior
If the
spanning-tree bpduguard
spanning-tree bpduguard
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None
Related commands
spanning-tree portfast default
spanning-tree portfast
spanning-tree bpduguard
180
command is set, that setting is used. If the
command is not set, this command does not operate.