shutdown
Places the port in the shutdown state. If a port with the PoE functionality is shut down, power
is no longer supplied.
Input format
To set information:
shutdown
To delete information:
no shutdown
Input mode
(config-if)
Parameters
None
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
When
from the SNMP manager, the setting is applied to this command.
2.
During scheduled operation of the power saving functionality, the Switch operates
according to the configuration of the
interface
3.
If you want a port to be always shut down regardless of a schedule, you must set both
the
Related commands
interface fastethernet
interface gigabitethernet
Set
of
ifAdminStatus
command.
schedule-power-control shutdown interface
is executed by the
SetRequest
schedule-power-control shutdown
operation of SNMP
command and this command.
shutdown
95