spanning-tree single priority
spanning-tree single priority
Sets the bridge priority for single spanning trees.
Input format
To set or change information:
spanning-tree single priority
To delete information:
no spanning-tree single priority
Input mode
(config)
Parameters
<Priority>
Sets the bridge priority. The lower the priority value, the higher the priority. Use a
multiple of 4096 as the bridge priority.
1.
2.
3.
Default behavior
32768 is set as the bridge priority.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None
Related commands
None
192
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
0 to 61440
Notes on using this parameter:
Changing the bridge priority might change the topology.
<Priority>