Table of Contents
Advertisement
Command description format
Command description format
Each command is described in the following format.
Function
Describes the purpose of the command.
Input format
Defines the input format of the command. The format is governed by the following rules:
1.
Parameters that set values or character strings are enclosed in angle brackets (
2.
Characters that are not enclosed in angle brackets (
typed exactly as they appear.
3.
{A|B}
4.
Parameters or keywords enclosed in square brackets (
omitted.
5.
Specifiable values for parameters shows the input format of parameters.
Input mode
Describes the mode in which a command can be entered by using the name displayed as
the prompt.
Parameters
Describes in detail the parameters that can be set by the command. The initial default value
and the values that can be specified for each parameter are described.
Default behavior
If there are parameters that have default values or a default behavior when a command is
not entered, that information is provided here.
Impact on communication
If the setting has an impact on communication, such as interrupted communication, that
impact is described.
When the change is applied
Describes, if configuration information in memory is changed, whether the changed value is
immediately operational or whether the change takes effect only by temporarily stopping
operation, such as by restarting the Switch.
Notes
Provides cautionary information on using the command.
Related commands
Describes the commands that must be set to use the applicable command.
2
indicates that either
or
A
<>
must be selected.
B
) are keywords that must be
[]
) are optional and can be
).
<>
Advertisement
Table of Contents
