Table of Contents
Advertisement
power inline
power inline
Sets the port priority. Setting the power priority for each port ensures that power is supplied
to the appropriate ports.
Input format
To set or change information:
power inline {critical | high | low | never }
To delete information:
no power inline
Input mode
(config-if)
Parameters
critical
Power is allocated to the most important port. Set this value for a port for which power
must always be supplied.
high
Power is supplied to ports whose priority is set to
the supply of power to ports with this specification stops only after power to ports with
the
low
Power is supplied to ports whose priority is set to
the supply of power to ports with this specification stops before the supply of power to
ports with the
never
Disables the PoE functionality of ports. When power is supplied, power is no longer
supplied and the PoE functionality is disabled. If a connected device is a
power-receiving device, power is not supplied.
Default behavior
high
is set.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
This command can be set for models that support the PoE functionality.
2.
If the remote device is a power supply device, set
functionality of the line.
3.
If a port has been shut down, no power is supplied to it.
90
low
setting has stopped.
setting.
high
high
. If power becomes insufficient,
. If power becomes insufficient,
low
never
to disable the PoE
Advertisement
Table of Contents
