Table of Contents
Advertisement
36.1.6 Ethernet information
Table 36-6 Ethernet error messages
Message
Cannot attach the interface
specified as a ring-port to the
channel-group.
port:Relations between media
type and
<command>
configuration are inconsistent.
this command is different from
this one in channel-group port.
36.1.7 Link aggregation information
Table 36-7 Link aggregation error messages
Message
Cannot attach the interface
specified as a ring-port to the
channel-group.
Can not change channel-group
mode.
Can not delete interface of
channel-group because specified
port status is up.
interface : Relations between
the mac-authentication
configuration and the
channel-group configuration
within same port.
interface : Relations between
the web-authentication
configuration and the
channel-group configuration
within same port.
Maximum number of channel-group
port are already defined.
Explanation
The interface port set as a ring port cannot participate in the port
channel.
To allow the specified interface to participate in the port channel, first
delete the ring-related configuration.
The
<command>
information cannot be changed because
media-type auto
is set.
<command>: duplex,
mdix
The configured command and the port channel configuration do not
match.
Match the configuration of the port channel to the configuration of
the command.
Explanation
The interface port set as a ring port cannot participate in the port
channel.
To allow the specified interface to participate in the port channel, first
delete the ring-related configuration.
The channel group mode cannot be changed.
To change the mode, you must set the channel group mode again
after deleting the existing channel group mode.
The port cannot be deleted because
ports.
Use configuration to shut down the applicable ports.
The specified port cannot join the port channel because the port is
being used by the MAC-based authentication configuration.
The specified port cannot join the port channel because the port is
being used by the Web authentication configuration.
No more ports can be set.
Review Revise the number of ports for each channel group.
auto, and
speed
shutdown
is not set on some
Index
661
Advertisement
Table of Contents
