Table of Contents
Advertisement
mtu
mtu
Sets the MTU for ports. With this configuration, jumbo frames can be used to improve the
throughput of data transfers. As a result, the usability of a network and devices connected to
the network improves.
Input format
To set or change information:
mtu
To delete information:
no mtu
Input mode
(config-if)
Parameters
<Length>
Sets the MTU of ports in octets. The MTU is the maximum length of the data section#
for frames in Ethernet V2 format.
#: For details about the frame format, see 12.1.3 Control on the MAC and LLC
sublayers in Configuration Guide Vol. 1.
1.
2.
Default behavior
The following initial values are set.
system mtu
Presence of the
Set
Not set
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
88
<Length>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
1500 to 9216
command
Initial value
system mtu
Setting value for
1500
Advertisement
Table of Contents
