Web-Authentication Port - Alaxala AX1250S Software Manual

web-authentication port

Sets the authentication mode for ports.
Input format
To set information:
web-authentication port
To delete information:
no web-authentication port
Input mode
(config-if)
Parameters
None
Default behavior
When Web authentication is valid, the port operates in legacy mode.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. All Web authentication settings take effect when the
system-auth-control
2. See Configuration commands and Web authentication modes for the authentication
mode in which the command's settings are operable.
3. If
extended-authentication
was set, this command cannot be set. (This command can be set if the
function
4. This command can be set only for Ethernet interfaces.
Related commands
web-authentication html-fileset
web-authentication system-auth-control
authentication ip access-group
authentication arp-relay
command is set.
was not set when the
command was not set.)
web-authentication port
web-authentication
command
system function
system
467