switchport backup mac-address-table update transmit
switchport backup mac-address-table update transmit
Enables the sending of MAC address update frames to request that the upstream switches
update their MAC address tables.
Input format
To set information:
switchport backup mac-address-table update transmit
To delete information:
no switchport backup mac-address-table update transmit
Input mode
(config-if)
Parameters
None
Default behavior
MAC address update frames are not sent.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
Set this command for the primary port.
Related commands
switchport backup interface
572