Index
36.1.4 Switch management information
Table 36-4 Error messages related to Switch management
Message
dhcp-snooping is in use.
extended-authentication is
in use.
filter is in use.
igmp-snooping is in use.
mld-snooping is in use.
qos is in use.
resource unavailable
36.1.5 Information about the power saving functionality
Table 36-5 Error messages related to the power saving functionality
Message
Can't execute.
Invalid time-range.
660
Explanation
This setting cannot be changed because the DHCP snooping
functionality is enabled. Delete the setting of
This setting cannot be changed because at least one of the following is
enabled:
Authentication IPv4 access list
IEEE 802.1X: Port-based authentication (dynamic)
Web authentication: Fixed VLAN mode, dynamic VLAN mode, or Web
authentication IP address
MAC-based authentication: Fixed VLAN mode or dynamic VLAN mode
Delete the following:
authentication arp-relay
authentication ip access-group
dot1x port-control
web-authentication ip address
web-authentication port
mac-authentication port
This setting cannot be changed because the filter functionality is enabled.
ip access-group
Delete the setting of
The setting cannot be changed because the IGMP snooping functionality
is enabled. Delete the setting of
This setting cannot be changed because the MLD snooping functionality
is enabled. Delete the setting of
The setting cannot be changed because the QoS functionality is enabled.
ip qos-flow-group
Delete the setting of
qos-flow-group.
The total number of specified resources exceeds 7. Sets a value equal to
or smaller than 7.
Explanation
This command cannot be executed. Execute it again.
An end date that is earlier than the start data is specified.
Review Revise the setting.
ip dhcp
snooping.
mac
access-group.
and of
ip igmp
snooping.
ipv6 mld
snooping.
mac
and of