Table of Contents
Advertisement
spanning-tree mst port-priority
Sets the priority of the applicable multiple-spanning-tree ports for each MST instance.
Input format
To set or change information:
spanning-tree mst
To delete information:
no spanning-tree mst
Input mode
(config-if)
Parameters
<MSTI ID list>
Sets an MST instance ID. One MST instance ID can be set. You can use a hyphen (
or a comma (
1.
2.
<Priority>
Sets the port priority. Use a multiple of 16 as the port priority. The lower the priority
value, the higher the priority.
1.
2.
3.
Default behavior
The setting of the
spanning-tree port-priority
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
<MSTI ID list>
<MSTI ID list>
,
) to set multiple MST instance IDs at one time.
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
0 to 4095
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
0 to 240
Notes on using this parameter:
Changing the port priority might change the topology.
spanning-tree port-priority
command has not been set, 128 is set as the port priority.
spanning-tree mst port-priority
port-priority
<Priority>
port-priority
command is used. If the
-
)
171
Advertisement
Table of Contents
