Dot1X Vlan Dynamic Radius-Vlan - Alaxala AX1250S Software Manual

dot1x vlan dynamic radius-vlan

Sets VLANs to allow dynamic VLAN allocation according to VLAN information sent from the
RADIUS server during IEEE 802.1X authentication.
Input format
To set information:

dot1x vlan dynamic radius-vlan

To change information:
dot1x vlan dynamic radius-vlan {
<VLAN ID list>
To delete information:
no dot1x vlan dynamic radius-vlan
Input mode
(config)
Parameters
<VLAN ID list>
Sets the ID of a VLAN to which the IEEE 802.1X authentication settings are applied.
Changing the parameter replaces the existing VLAN with the VLAN that has been set.
VLANs that have not been set for a Switch cannot be set.
1.
2.
add <VLAN ID list>
Sets a VLAN to be added to the VLANs to which the IEEE 802.1X authentication
settings are applied. VLANs that have not been set for a Switch cannot be set.
1.
2.
remove <VLAN ID list>
Sets a VLAN to be removed from the VLANs to which the IEEE 802.1X authentication
settings are applied. VLANs that have not been set for a Switch cannot be set.
1.
2.
}
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
For details about how to set
Specifiable values for parameters. Note that the default VLAN (
cannot be set by using this command.
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
For details about how to set
Specifiable values for parameters. Note that the default VLAN (
cannot be set by using this command.
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
For details about how to set
<VLAN ID list>
<VLAN ID list> | add
<VLAN ID list> and the specifiable values, see
<VLAN ID list> and the specifiable values, see
<VLAN ID list> and the specifiable values, see
dot1x vlan dynamic radius-vlan
<VLAN ID list> | remove
VLAN ID = 1
VLAN ID = 1
415
)
)