Table of Contents
Advertisement
snmp-server community
Sets the access list for the SNMP community. A maximum of four entries can be configured.
Input format
To set or change information:
snmp-server community
To delete information:
no snmp-server community
Input mode
(config)
Parameters
<String>
Sets the community name for the SNMP manager.
1.
2.
{ro | rw}
Sets the MIB operating mode for the manager whose IP address belongs to the
community that has been set. If
permitted. If
permitted.
1.
2.
<ACL ID>
Sets the name of the standard access list in which the permissions for this community
are set. If
has not been set, all accesses are permitted.
One access list is permitted for one community.
1.
2.
<String>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
Specify a character string that is no more than 60 characters. For details about
the characters that can be specified, see Specifiable values for parameters.
rw
is set,
Get Request
Default value when this parameter is omitted:
ro
Range of values:
ro
or
rw
<ACL ID>
is omitted, all accesses are permitted. In addition, if
Default value when this parameter is omitted:
None. (all accesses are permitted.)
Range of values:
Set 3 to 31 characters, the first character of which must be a non-numeric
character. For details about the characters that can be specified, see
Specifiable values for parameters.
[ {ro|rw} ] [
<ACL ID>
<String>
ro
is set,
Get Request
,
GetNext Request
snmp-server community
]
and
GetNext Request
, and
Set Request
are
<ACL ID>
are
627
Advertisement
Table of Contents
