Table of Contents
Advertisement
mac-authentication password
mac-authentication password
When the RADIUS authentication method is used, this command sets the password used
for sending authentication requests to the RADIUS server.
Input format
To set or change information:
mac-authentication password
To delete information:
no mac-authentication password
Input mode
(config)
Parameters
<Password>
Sets the password used when sending authentication requests to the RADIUS
server.
1.
2.
Default behavior
When the
terminal subject to authentication in the format set by using that command becomes the
password.
If the
mac-authentication id-format
subject to authentication in
the password.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
All MAC-based authentication settings take effect when the
system-auth-control
2.
See Configuration commands and MAC-based authentication modes for the
authentication mode in which the command's settings are operable.
3.
The passwords set by using this command are common to all MAC-based
532
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
1 to 32 characters can be set. For details about the characters that can be
specified, see Specifiable values for parameters.
mac-authentication id-format
xx-xx-xx-xx-xx-xx
command is set.
<Password>
command is set, the MAC address of the
command is not set, the MAC address of a terminal
format (a to f must be lowercase) becomes
mac-authentication
Advertisement
Table of Contents
