36.1.9 Vlan Information - Alaxala AX1250S Software Manual

36.1.9 VLAN information

Table 36-9 VLAN error messages
Message
ChGr
<Channel group#>:
Inconsistency is found between
the dot1x port-control and the
switchport mode configuration.
Inconsistency is found between
the dot1x vlan enable or dot1x
vlan dynamic radius-vlan
and the vlan configuration.
ID>
interface : Relations between
the mac-authentication
configuration and the vlan mode
configuration are inconsistent.
interface : Relations between
the web-authentication
configuration and the vlan mode
configuration are inconsistent.
port <IF#>: Inconsistency is
found between the dot1x
port-control and the switchport
mode configuration.
Relations between vlan in
access-group configuration and
switchport configuration are
inconsistent.
Relations between vlan in dot1q
configuration and mac vlan
configuration are inconsistent.
Relations between vlan in dot1q
configuration and native
configuration are inconsistent.
Relations between vlan in ip
source binding configuration
and switchport configuration
are inconsistent.
Relations between vlan in
qos-flow-group configuration
and switchport configuration
are inconsistent.
Explanation
The port channel cannot be deleted because it is being used for
IEEE 802.1X authentication or as a switch port.
<Channel group#>: Channel group number
The specified VLAN cannot be deleted because it is being used as
the VLAN for IEEE 802.1X VLAN-based authentication (dynamic).
<VLAN
<VLAN ID>: VLAN ID
The setting of the specified port cannot be changed because it is
being used for MAC-based authentication.
mac-authentication port
Delete the
reconfigure.
The configuration of the specified port cannot be changed because
the port is used for Web authentication.
web-authentication port
Delete the
reconfigure.
The configuration of the specified port cannot be changed because it
is being used for IEEE 802.1X authentication.
<IF#>: Interface port number
The configuration of the specified VLAN cannot be changed
because it is being used by
access-group.
Delete the configuration of
access-group
switchport mac dot1q vlan
cannot be set because they use the same VLAN.
switchport mac dot1q vlan
vlan
cannot both be configured because they specify the same
VLAN.
The configurations cannot be changed because
binding
is using it.
ip source binding
Delete the
The configuration of the specified VLAN cannot be changed
because it is used by
qos-flow-group.
Delete the configuration of
qos-flow-group
reconfigure.
ip access-group
ip access-group
for the applicable VLAN, and then reconfigure.
switchport mac vlan
and
switchport mac native
and
setting, and then set it again.
ip qos-flow-group
ip qos-flow-group
for which the applicable VLAN is set, and then
Index
configuration, and then
configuration, and then
mac
or
mac
or
ip source
mac
or
mac
or
663