Table of Contents
Advertisement
control-vlan
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
A VLAN that is a control VLAN for which another ring ID is used cannot be set.
2.
A VLAN that is used in a VLAN group cannot be set.
3.
If a change or deletion is executed while the Ring Protocol is operating, the Ring
Protocol functionality is temporarily disabled. As a result, a loop might occur
depending on that network configuration (ring configuration) to which the functionality
is being applied. To prevent looping before entering this command, place the
interface that is the ring port in the shutdown state.
4.
forwarding-delay-time
Related commands
vlan
220
operates when the following occurs:
The Switch is started (includes execution of the
command).
reload
or
ppupdate
operation
Advertisement
Table of Contents
