Web-Authentication Logout Polling Count - Alaxala AX1250S Software Manual

web-authentication logout polling count

Specifies the number of times a Switch retransmits the monitoring packet when there is no
response to a monitoring frame that periodically checks a connection status of
authenticated terminals.
Input format
To set or change information:
web-authentication logout polling count
To delete information:
no web-authentication logout polling count
Input mode
(config)
Parameters
<Count>
Sets the number of times a Switch retransmits a monitoring packet when there is no
response to a monitoring frame.
1.
2.
Default behavior
The monitoring frame is retransmitted a maximum of three times.
Impact on communication
None
When the change is applied
The setting takes effect the first time no response is detected following the change of value.
Notes
1. All Web authentication settings take effect when the
system-auth-control
2. See Configuration commands and Web authentication modes for the authentication
mode in which the command's settings are operable.
3. If the link for a monitored terminal goes down before periodic monitoring by the
functionality that monitors the connection of authenticated terminals arrives, the
Switch stops monitoring the terminal and logs it out due to its link-down state.
4. When the specified maximum connection time (set by using the
web-authentication max-timer
the applicable terminal and logs it out.
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
1 to 10 (times)
command is set.
web-authentication logout polling count
<Count>
web-authentication
command) expires, the Switch stops monitoring
453