Ip Dhcp Snooping Database Url - Alaxala AX1250S Software Manual

ip dhcp snooping database url

ip dhcp snooping database url
Sets the save location for the binding database.
Input format
To set or change information:
ip dhcp snooping database url { flash | mc
To delete information:
no ip dhcp snooping database url
Input mode
(config)
Parameters
flash
The database is saved to internal flash memory.
1.
2.
mc <File name>
The database is saved to a memory card.
1.
2.
Default behavior
The binding database is not saved.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
236
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
flash
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
<File name>: A maximum of 64 characters can be set.
If directories are created on a memory card by using an operation command, a
maximum of 64 characters, including the directory name, can be set.
For details about the characters that can be specified, see Specifiable values
for parameters.
<File name> }