Spanning-Tree Portfast - Alaxala AX1250S Software Manual

spanning-tree portfast

Sets the PortFast functionality for the applicable ports. This command is applied to the
applicable PVST+, single-spanning-tree, and multiple-spanning-tree ports.
Input format
To set or change information:
spanning-tree portfast [{ trunk | disable }]
To delete information:
no spanning-tree portfast
Input mode
(config-if)
Parameters
{ trunk | disable }
If
trunk
MAC ports.
If disable
1.
2.
Default behavior
The setting of the
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None
Related commands
spanning-tree portfast default
is set, the PortFast functionality is applied to access, trunk, protocol, and
is set, the PortFast functionality stops.
Default value when this parameter is omitted:
The PortFast functionality, which is enabled on access, protocol, and MAC
ports, is applied.
Range of values:
trunk or disable
spanning-tree portfast default
spanning-tree portfast
command is used.
179