web-authentication radius-server host
6.
If the
RADIUS server is disabled.
7.
If multiple Web authentication RADIUS servers are configured, the address displayed
first by using the
primary Web authentication RADIUS server. The primary Web authentication
RADIUS server is used as the first current server (the destination for RADIUS
authentication requests during operation).
If a failure occurred in the primary Web authentication RADIUS server, the current
server switches to the next effective Web authentication RADIUS server (secondary
RADIUS server). For details about automatic restoration of the primary Web
authentication RADIUS server, see the description about the
radius-server dead-interval
8.
If a RADIUS server with an IP address that matches has already been registered in
the general RADIUS server configuration, the authentication-specific RADIUS server
configuration, or the RADIUS server group configuration, all these parameters are
replaced by the new commands that were entered automatically.
Related commands
aaa authentication web-authentication
web-authentication port
web-authentication system-auth-control
472
key
parameter is omitted and the
show radius-server
radius-server key
operation command is the address of the
command.
command is not set, the
web-authentication