Table of Contents
Advertisement
qos-queue-list
wfq [ min-rate1
rate3>
<Min rate6>
Table 20-10 Range of values for the minimum bandwidth
Line speed
Item
No.
1
1 Gbit/s
2
100 Mbit/s
3
10 Mbit/s
352
Regardless of the queue length, the number of packets is controlled so that
packets are distributed evenly. When
packets) round robin is used. If there are packets in multiple queues, packets
are sent according to the number of packets set for
are looked at in order. A number from 1 to 8 suffixed to
queue number.
1.
Default value when this parameter is omitted:
<Packet>: This parameter cannot be omitted.
Note, however, that all
omitted, round robin is used.
2.
Range of values:
<Packet>: 1 to 15
<Min rate1>
] [ min-rate4
<Min rate4>
] [ min-rate7
Weighted fair queuing. The number of queues is fixed at eight queues for each
physical port. The minimum bandwidth, which is set for each queue as
rate>, is sent for packets. Note that a number from 1 to 8 suffixed to
indicates a queue number.
1.
Default value when this parameter is omitted:
<Min
rate>: None. (A minimum bandwidth is not set.)
2.
Range of values:
min-rate
<Min
The value can be set as kbit/s or Mbit/s.
kbit/s unit:
<Min rate>
Mbit/s unit:
<Min rate>
Set
<Min rate>
values so that their total value does not exceed the line
bandwidth.
Bandwidth
64 kbit/s to 1 Gbit/s
64 kbit/s to 100
Mbit/s
64 kbit/s to 10 Mbit/s
<Packet>
<Packet>
values can be omitted. If they are
] [ min-rate2
<Min rate2>
] [ min-rate5
<Min rate7>
] [ min-rate8
rate>: See the table below.
M
Setting range
In Mbit/s
1 M to 1000 M
In kbit/s
1000 to 1000000
64 to 960
In Mbit/s
1 M to 100 M
In kbit/s
1000 to 100000
64 to 960
In Mbit/s
1 M to 10 M
is set, weighted (number of
<Packet>
>as the queues
<Packet>
indicates the
] [ min-rate3
<Min rate5>
] [ min-rate6
<Min rate8>
]
<Min rate>
Step value
#1
1 M
#2
100 k
#3
64 k
#1
1 M
#2
100 k
#3
64 k
#1
1 M
<Min
<Min
Advertisement
Table of Contents
