Table of Contents
Advertisement
MAC address (nnnn.nnnn.nnnn): 0000.0000.0000 to ffff.ffff.ffff (hexadecimal)
{
<Dst MAC> <Dst MAC mask>
| oadp | pvst-plus-bpdu }
Sets the destination MAC address.
To set all destination MAC addresses, set
1.
Default value when this parameter is omitted:
This parameter cannot be omitted.
2.
Range of values:
Specify
<Dst MAC> <Dst MAC
lacp, lldp, oadp,
<Dst MAC> <Dst MAC mask>
-
Specify the destination MAC address for
For
permits an arbitrary value in the MAC address.
-
host
The filter condition is a perfect match of
-
any
The destination MAC address is not included as a filter condition.
bpdu
-
Sets BPDU control packets as a filter condition.
-
cdp
Sets CDP control packets as a filter condition.
lacp
-
Sets LACP control packets as a filter condition.
-
lldp
Sets LLDP control packets as a filter condition.
-
oadp
Sets OADP control packets as a filter condition.
pvst-plus-bpdu
-
Sets PVST+ control packets as a filter condition.
MAC address (nnnn.nnnn.nnnn): 0000.0000.0000 to ffff.ffff.ffff (hexadecimal)
<Ethernet type>
Specify the Ethernet type number or the Ethernet type name.
1.
Default value when this parameter is omitted:
None. (The parameter is not set as a detection condition.)
2.
Range of values:
Set 0x0000 to 0xffff (hexadecimal) or the Ethernet type name.
Note, however, that 0x0000 is set for a value equal to or smaller than 0x05ff.
For details about the Ethernet type names that can be set, see Table 19-7
Ethernet type names that can be specified.
| host
<Dst MAC>
mask>,
or
pvst-plus-bpdu
<Dst MAC
mask>, specify a mask in MAC address format that
<Dst MAC>
specification:
specification:
specification:
specification:
specification:
specification:
specification:
specification:
deny (mac access-list extended)
| any | bpdu | cdp | lacp | lldp
any
.
host
<Dst
MAC>,
.
specification:
<Dst
MAC>.
<Src
MAC>.
any
,
bpdu, cdp,
289
Advertisement
Table of Contents
