Table of Contents
Advertisement
spanning-tree vlan cost
Sets the path cost for the applicable PVST+ ports.
Input format
To set or change information:
spanning-tree vlan
To delete information:
no spanning-tree vlan
Input mode
(config-if)
Parameters
<VLAN ID list>
Starts configuration of PVST+ for the specified VLAN.
1.
2.
<Cost>
Specify the path cost value. The lower the
the port will be used for forwarding the applicable frames.
1.
2.
3.
Default behavior
The path cost is applied according to the setting of the
method
command.
Impact on communication
None
<VLAN ID list>
<VLAN ID list>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
For details about how to set
Specifiable values for parameters.
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
If
short
is set for the
spanning-tree pathcost method
spanning-tree vlan
1 to 65535
If
long
is set for the
spanning-tree pathcost method
vlan
<VLAN ID list>
pathcost method
1 to 200000000
Notes on using this parameter:
Changing the port priority might change the topology.
cost
<Cost>
cost
<VLAN ID list>
and the specifiable values, see
<Cost>
value, the higher the possibility that
<VLAN ID list>
pathcost method
command:
spanning-tree vlan pathcost
spanning-tree vlan cost
or the
command:
or the
spanning-tree
195
Advertisement
Table of Contents
