Table of Contents
Advertisement
web-authentication static-vlan max-user (interface)
web-authentication static-vlan max-user (interface)
Sets the maximum number of users that can be authenticated on the applicable port.
Input format
To set or change information:
web-authentication static-vlan max-user
To delete information:
no web-authentication static-vlan max-user
Input mode
(config-if)
Parameters
<Count>
Specify the maximum number of users that can be authenticated on the applicable
port when the port requires authentication.
1.
2.
Default behavior
The maximum number of users that can be authenticated on the port is 1024.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
All Web authentication settings take effect when the
system-auth-control
2.
See Configuration commands and Web authentication modes for the authentication
mode in which the command's settings are operable.
3.
When this command is set, the setting is not applied to users that have already been
authenticated, and takes effect only from the next login.
4.
The maximum number of users that can be authenticated on a Switch and a port can
be set at the same time.
484
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
1 to 1024
command is set.
If the number of authenticated users reaches the maximum number for a port,
no more new users can be authenticated on that port.
If the number of authenticated users reaches the maximum number for a Switch,
<Count>
web-authentication
Advertisement
Table of Contents
