Web-Authentication Logout Ping Tos-Windows - Alaxala AX1250S Software Manual

Configuration command reference
Hide thumbs Also See for AX1250S:
Table of Contents

Advertisement

web-authentication logout ping tos-windows

Sets the TOS value of a special frame used to log out from an authenticated terminal.
Input format
To set or change information:
web-authentication logout ping tos-windows
To delete information:
no web-authentication logout ping tos-windows
Input mode
(config)
Parameters
<TOS>
Sets the TOS value for the special frame used for logout.
1.
2.
Default behavior
1 is set as the TOS value of the special frame.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
All Web authentication settings take effect when the
system-auth-control
2.
See Configuration commands and Web authentication modes for the authentication
mode in which the command's settings are operable.
3.
When a ping frame that meets all the following conditions is received, the
authenticated terminal is logged out.
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
0 to 255
command is set.
A ping frame is sent from an authenticated terminal to the Web authentication IP
address.
The TTL value of the ping frame must match the TTL value specified by using
the
web-authentication logout ping ttl
The TOS value of the ping frame must match the TOS value set by using this
command.
web-authentication logout ping tos-windows
<TOS>
web-authentication
command.
449

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ax1240s

Table of Contents