Duplex - Alaxala AX1250S Software Manual

duplex

Sets the duplex mode of a port.
Input format
To set or change information:
duplex {half | full |auto}
To delete information:
no duplex
Input mode
(config-if)
Parameters
half
Sets the port to half duplex (fixed) mode.
full
Sets the port to full duplex (fixed) mode.
auto
Determines the duplex mode by auto-negotiation.
The following table shows the combinations of line type and parameters that can be
set.
Line type Parameters that can be set
10BASE-T/ auto
100
100BASE-TX
half
full
auto
10BASE-T/
auto 10
100BASE-TX/
half
1000BASE-T
full
full
100BASE-FX
[AX1250S]
auto
1000BASE-X
full
1.
2.
speed auto, auto
(when
is set)
speed 10 speed 100
(when or
speed 10 speed 100
(when or
speed auto, auto
(when
100, or auto 10 100 1000
speed 10 speed 100
(when or
speed 10 speed 100
(when or
speed 100
(when is set)
speed auto auto 1000
(when or
speed 1000
(when is set)
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
half , full , and auto
10, auto 100, or auto 10
is set)
is set)
10, auto 100, auto 1000,
is set)
is set)
is set)
is set)
duplex
Behavior if omitted
auto
auto
auto
(always full duplex
operation)
auto
(always full duplex
operation)
77