Table of Contents
Advertisement
spanning-tree mst forward-time
spanning-tree mst forward-time
Sets the time required for a multiple-spanning-tree status transition.
Input format
To set or change information:
spanning-tree mst forward-time
To delete information:
no spanning-tree mst forward-time
Input mode
(config)
Parameters
<Seconds>
Specify the time in seconds required for the state of a port to change.
For ports in stp-compatible mode, only the listening and the learning states can be
maintained for the specified period of time. If a port is not in stp-compatible mode,
only the discarding state and the learning state are maintained for the specified
period of time (note that this applies only when the timer causes the status transition).
1.
2.
Default behavior
15 seconds is set as the time required for the state of a port to change.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None
Related commands
None
166
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
4 to 30 (seconds)
<Seconds>
Advertisement
Table of Contents
