Table of Contents
Advertisement
radius-server timeout
radius-server timeout
Configures the default response timeout value for the general RADIUS server used for
authentication or for an authentication-specific RADIS server.
Input format
To set or change information:
radius-server timeout
To delete information:
no radius-server timeout
Input mode
(config)
Parameters
<Seconds>
Sets the response timeout period from the RADIUS server.
1.
2.
Default behavior
The default response timeout value for the RADIUS server is 5 seconds.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
The
mac-authentication radius-server host
radius-server host
36
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
1 to 30 (seconds)
timeout
configurations of
have precedence over this configuration.
<Seconds>
radius-server host
, and
,
dot1x radius-server host
web-authentication
,
Advertisement
Table of Contents
