Table of Contents
Advertisement
spanning-tree mst root priority
Sets the bridge priority for each MST instance in multiple spanning trees.
Input format
To set or change information:
spanning-tree mst
To delete information:
no spanning-tree mst
Input mode
(config)
Parameters
<MSTI ID list>
Sets an MST instance ID. One MST instance ID can be set. You can use a hyphen (
or a comma (
1.
2.
<Priority>
Sets the bridge priority. The lower the priority value, the higher the priority. Use a
multiple of 4096 as the bridge priority.
1.
2.
3.
Default behavior
32768 is set as the bridge priority.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None
<MSTI ID list>
<MSTI ID list>
,
) to set multiple MST instance IDs at one time.
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
0 to 4095
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
0 to 61440
Notes on using this parameter:
Changing the bridge priority might change the topology.
spanning-tree mst root priority
root priority
<Priority>
root priority
-
)
173
Advertisement
Table of Contents
