Ip Qos-Flow-List Resequence - Alaxala AX1250S Software Manual

ip qos-flow-list resequence

Resets the sequence numbers of the application sequence in the IPv4 QoS flow list.
Input format
To set or change information:
ip qos-flow-list resequence
seq>
Input mode
(config-ip-qos)
Parameters
<QoS flow list name>
Sets the name of the IPv4 QoS flow list to be changed.
1.
2.
<Starting seq>
Specify the starting sequence number.
1.
2.
<Increment seq>
Sets the increment value for the sequence.
1.
2.
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
] ]
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
Set 3 to 31 characters, the first character of which must be a non-numeric
character. For details about the characters that can be specified, see
Specifiable values for parameters.
Default value when this parameter is omitted:
The initial value is 10.
Range of values:
Set 1 to 4294967295 (in decimal).
Default value when this parameter is omitted:
The initial value is 10.
Range of values:
Set 1 to 100 (in decimal).
<QoS flow list name> [
ip qos-flow-list resequence
<Starting seq> [ <Increment
329