Table of Contents
Advertisement
ip dhcp snooping limit rate
Sets the DHCP packet reception rate (the number of DHCP packets that can be received
per second) on the applicable port. DHCP packets exceeding the reception rate are
discarded.
Input format
To set or change information:
ip dhcp snooping limit rate
To delete information:
no ip dhcp snooping limit rate
Input mode
(config-if)
Parameters
<Packet/s>
Specify the number of DHCP packets that can be received per second.
1.
2.
Default behavior
The reception rate has no limit.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
When the
dhcp snooping trust
rate
ARP packets.
Related commands
ip dhcp snooping
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
1 to 300 packets/s
ip dhcp snooping limit rate
command is set, the settings of the
command become invalid. As a result, there is no limit on the reception rate for
<Packet/s>
command is set on the port where the
ip dhcp snooping limit rate
ip dhcp snooping limit
241
ip
Advertisement
Table of Contents
