Table of Contents
Advertisement
network
network
Sets the subnet of the network in which IP addresses are dynamically distributed via DHCP.
Only the subnets whose host bits in the IP address host part are all 0s or 1s are actually
registered in the DHCP address pool.
Input format
To set or change information:
network
To delete information:
no network
Input mode
(dhcp-config)
Parameters
<IP address>
Sets the network address of the DHCP address pool. If the mask is omitted, a mask
corresponding to class A, B, or C is set.
Table 23-2 IP address range for each class
Class
Class A (/8)
Class B (/16)
Class C (/24)
<IP address>
<Masklen>
504
<IP address>
[/
<Masklen>
[/
<Masklen>
]
1.
Default value when this parameter is omitted:
This parameter cannot be omitted.
2.
Range of values:
The following address cannot be set:
127.0.0.0 to 127.255.255.255
An address whose host part is all binary 0s or 1s
Addresses outside the address ranges shown in IP address range
for each class.
1.
Default value when this parameter is omitted:
A mask corresponding to class A, B, or C as described in IP address
range for each class.
2.
Range of values:
8 to 32
Dot notation (255.0.0.0 to 255.255.255.255) can also be used.
]
IP addresses
1.x.x.x
127.x.x.x
to
128.x.x.x
191.x.x.x
to
192.x.x.x
223.x.x.x
to
Advertisement
Table of Contents
