Specifiable Values For Parameters - Alaxala AX1250S Software Manual

Configuration command reference
Hide thumbs Also See for AX1250S:
Table of Contents

Advertisement

Specifiable values for parameters

Specifiable values for parameters
The following table describes the values that can be specified for parameters. If there are no
limitations on parameter names, see Any character string.
Table 1-2 Specifiable values for parameters
Parameter type
Any character string
Access list name
QoS flow list name
QoS queue list name
MAC addresses,
MAC address mask
IPv4 address,
IPv4 subnet mask
IPv4 address wildcard
IPv6 address
Specification of multiple
interfaces
4
Description
See List of character codes.
See List of character codes.
Note that you cannot specify a digit as the first
character.
If the command input format permits
specification of either a name or a command
name and parameters (or keywords) and you
specify a name that is identical to a command
name or a parameter (or keyword), the system
assumes that the command or the parameter
(or keyword) has been entered.
Specify these items in hexadecimal format,
separating 2- byte hexadecimal values by a
period (.).
Specify these items in decimal format,
separating 1-byte decimal values by a period
(.).
The same input format as IPv4 address.
Setting a bit indicates permission.
Specify this item in hexadecimal format,
separating 2-byte hexadecimal values by a
colon (:).
Set the information about multiple interfaces.
You can specify fastethernet,
gigabitethernet, vlan, and
port-channel
interfaces. However, you
fastethernet
cannot specify both
gigabitethernet.
The following are the input formats:
fastethernet
For
interface range fastethernet
list>
gigabitethernet
For
interface range gigabitethernet
list>
vlan
For
interface range vlan
port-channel
For
interface range port-channel
<Channel group# list>
Input example
name
mac access-list extended
list101
1234.5607.08ef
0000.00ff.ffff
192.168.0.14
255.255.255.0
255.255.0.0
3ffe:501:811:ff03::87ff:
fed0:c7e0
interface range
fastethernet 0/1-3
interface range
and
gigabitethernet 0/25-26
interface range vlan 1-100
<IF#
<IF#
<VLAN ID list>
"PORT BASED VLAN-1"

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ax1240s

Table of Contents