Table of Contents
Advertisement
clock timezone
Sets the time zone.
This Switch maintains the date and time internally in Coordinated Universal Time (UTC).
Therefore, this setting has an effect only when the time is displayed by using an operation
command or when the time is set by using the
Input format
To set or change information:
clock timezone
To delete information:
no clock timezone
Input mode
(config)
Parameters
<Zone name>
Sets the name used to identify a time zone.
1.
2.
<Hours offset>
Sets an offset in hours from UTC in decimal.
1.
2.
<Minutes offset>
Sets an offset in minutes from UTC.
1.
2.
Default behavior
UTC is used.
Impact on communication
None
<Zone name> <Hours offset>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
A maximum of seven alphanumeric characters
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
-12 to -1, 0, 1 to 12
Default value when this parameter is omitted:
0
Range of values:
0 to 59 in decimal
set clock
command.
[
<Minutes offset>
clock timezone
]
41
Advertisement
Table of Contents
