Table of Contents
Advertisement
snmp-server location
Sets the name of the location where the Switch is installed.
Input format
To set or change information:
snmp-server location
To delete information:
no snmp-server location
Input mode
(config)
Parameters
<Text>
Sets the name of the location where the Switch is installed. This information can be
referenced by using the name set in
from the SNMP manager.
1.
2.
Default behavior
The initial value is null.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
When information about
manager, you must use the
manager.
Related commands
None
<Text>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
Specify a character string that is no more than 60 characters. For details about
the characters that can be specified, see Specifiable values for parameters.
name
snmp-server community
[sysLocation]
,
contact
, and
location
snmp-server location
of the system group for inquiries
is referenced from the SNMP
command to register the SNMP
635
Advertisement
Table of Contents
