spanning-tree vlan priority
Sets the PVST+ bridge priority.
Input format
To set or change information:
spanning-tree vlan
To delete information:
no spanning-tree vlan
Input mode
(config)
Parameters
<VLAN ID list>
Starts configuration of PVST+ for the specified VLAN.
1.
2.
<Priority>
Sets the bridge priority. The lower the priority value, the higher the priority.
Use a multiple of 4096 as the bridge priority.
1.
2.
3.
Default behavior
32768 is set as the bridge priority.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
<VLAN ID list>
<VLAN ID list>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
For details about how to set
Specifiable values for parameters.
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
0 to 61440
Notes on using this parameter:
Changing the bridge priority might change the topology.
priority
<Priority>
priority
<VLAN ID list>
and the specifiable values, see
spanning-tree vlan priority
209