Switchport Trunk - Alaxala AX1250S Software Manual

switchport trunk

switchport trunk
Sets the trunk port information.
Input format
To set information:
switchport trunk allowed vlan
switchport trunk native vlan
To change information:
switchport trunk native vlan
switchport trunk allowed vlan {
<VLAN ID
To delete information:
no switchport trunk allowed vlan
no switchport trunk native vlan
Input mode
(config-if)
Parameters
native vlan
Sets the native VLAN (VLAN that sends and receives untagged frames). Specifiable
VLANs are port VLANs. If a native VLAN is not set, the default VLAN becomes the
native VLAN.
1.
2.
allowed vlan
Sets the VLANs that use a trunk port for sending and receiving frames.
The frames of VLANs that have not been set are discarded.
To send and receive untagged frames, you must set the native VLAN. If you do not
set the native VLAN to
1.
2.
<VLAN ID list>
add
Adds a VLAN to the VLAN list that is set.
1.
138
list>}
<VLAN ID>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
See Specifiable values for parameters.
<VLAN ID list>
allowed vlan
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
For details about how to set
Specifiable values for parameters.
Default value when this parameter is omitted:
This parameter cannot be omitted.
<VLAN ID list>
<VLAN ID>
<VLAN ID>
<VLAN ID list> | add
, untagged frames are discarded.
<VLAN ID list> and the specifiable values, see
<VLAN ID list> | remove