schedule-power-control time-range
HH
MM
1.
2.
Parameters for specifying everyday
start-time
Specifies the start time.
HH
MM
1.
2.
end-time
Specify the end time.
HH
MM
1.
2.
action {enable | disable}
Specify the power control behavior for the execution time.
enable
disable
66
Specify the hour (00 to 23).
Specify the minute (00 to 59).
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
Select
,
,
,
sun
mon
tue
<HHMM>
Specify the hour (00 to 23).
Specify the minute (00 to 59).
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
Specify a time for <HHMM>.
<HHMM>
Specify the hour (00 to 23).
Specify the minute (00 to 59).
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
Specify a time for <HHMM>.
Enables the setting specified by using a configuration command for the
scheduled power saving functionality for the time of execution set by using this
command.
Disables the setting specified by using a configuration command for the
scheduled power saving functionality for the time of execution set by using this
command. Thereafter, the following configuration command settings are
enabled:
-
system port-led
,
,
, or
, and specify a time for <HHMM>.
wed
thu
fri
sat