Alaxala AX1250S Software Manual page 702

Index
Message
dot1x(vlan dynamic): Cannot set
"dot1x vlan dynamic
supplicant-detection disable"
because ignore-eapol-start is
set now.
dot1x(vlan dynamic): Cannot set
"no dot1x vlan dynamic
reauthentication" because
ignore-eapol-start is set now.
dot1x(xxxxx): Cannot delete
"dot1x port-control" because
authentication ip
access-group/arp-relay is set.
dot1x(xxxxx): Cannot delete
"dot1x port-control" because
dot1x force-authorized is set.
dot1x(xxxxx): Cannot set "dot1x
force-authorized"
because authentication
force-authorized is set.
dot1x(xxxxx): Cannot set "dot1x
force-authorized" because
802.1X auth mode is unmatch.
dot1x(xxxxx): Cannot set "dot1x
ignore-eapol-start" because
reauthentication mode is
invalid.
dot1x(xxxxx): Cannot set "dot1x
ignore-eapol-start" because
supplicant-detection is
disable-method.
dot1x: Cannot set "aaa
authentication dot1x" because
the maximum number is already
678
Explanation
The terminal detection mode cannot be disabled because the
functionality for suppressing the re-authentication of requests from a
terminal for VLAN-based authentication (dynamic) is set.
The re-authentication request functionality cannot be disabled
because the functionality for suppressing the re-authentication of
requests from a terminal for VLAN-based authentication (dynamic)
is set.
dot1x port-control
authentication arp-relay
access-group
are set for the
xxxxx:
ethernet
<IF#>: Ethernet interface port number
port-channel
<Channel
dot1x port-control
force-authorized
command is set for the
xxxxx:
ethernet
<IF#>: Ethernet interface port number
port-channel
<Channel
dot1x force-authorized
The
authentication force-authorized
the
the xxxxx interface.
ethernet
<IF#>: Ethernet interface port number
port-channel
<Channel
dot1x force-authorized
The
authentication mode of the
xxxxx:
ethernet
<IF#>: Ethernet interface port number
port-channel
<Channel
The functionality for suppressing the re-authentication of requests
from a terminal cannot be set because the re-authentication request
functionality of the xxxxx
xxxxx:
ethernet
<IF#>: Ethernet interface port number
port-channel
<Channel
The functionality for suppressing the re-authentication of requests
from a terminal cannot be set because the terminal detection mode
of the xxxxx interface is disabled.
xxxxx:
ethernet
<IF#>: Ethernet interface port number
port-channel
<Channel
No more entries can be registered because the maximum number of
entries are already registered in the authentication method list.
cannot be deleted because
authentication ip
and
xxxxx interface.
group#>: Port channel number
cannot be deleted because the
xxxxx
group#>: Port channel number
command cannot be set because
command is set for
group#>: Port channel number
command cannot be set because
xxxxx interface is different.
group#>: Port channel number
interface is not enabled.
group#>: Port channel number
group#>: Port channel number
dot1x
interface.