Table of Contents
Advertisement
mac-authentication radius-server host
Configures the RADIUS server used for MAC-based authentication.
Input format
To set or change information:
mac-authentication radius-server host
[acct-port
<String>
To delete information:
no mac-authentication radius-server host
Input mode
(config)
Parameters
<IP address>
Sets the IPv4 address of the RADIUS server.
1.
2.
auth-port
Sets the RADIUS server port number.
1.
2.
acct-port
Sets the port number for RADIUS server accounting.
1.
2.
timeout
Sets the timeout period (in seconds) for a response from the RADIUS server.
1.
2.
<Port>
] [timeout
]
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
Sets the IPv4 address (dot notation).
1.0.0.0 to 126.255.255.255, 128.0.0.0 to 223.255.255.255
<Port>
Default value when this parameter is omitted:
Port number 1812 is used.
Range of values:
1 to 65535
<Port>
Default value when this parameter is omitted:
Port number 1813 is used.
Range of values:
1 to 65535
<Seconds>
Default value when this parameter is omitted:
The period of time set by using the
used. If no period is set, the initial value is 5.
Range of values:
mac-authentication radius-server host
<IP address>
<Seconds>
] [retransmit
<IP address>
radius-server timeout
[auth-port
<Port>
]
<Retries>
] [key
command is
537
Advertisement
Table of Contents
