Table of Contents
Advertisement
radius-server key
radius-server key
Configures the default RADIUS server key used for authentication on a general RADIUS
server or an authentication-specific RADIUS server.
Input format
To set or change information:
radius-server key
To delete information:
no radius-server key
Input mode
(config)
Parameters
<String>
Sets the RADIUS key used for encryption or for authentication of communication with
the RADIUS server. The same RADIUS key must be set for the client and the
RADIUS server.
1.
2.
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
The
radius-server host
configurations have precedence over this configuration.
32
<String>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
Specify a character string that is no more than 64 characters. For details about
the characters that can be specified, see Specifiable values for parameters.
radius-server host
,
, and
dot1x radius-server host
web-authentication radius-server host
,
mac-authentication
key
Advertisement
Table of Contents
