snmp-server contact
Sets the contact information about the Switch.
Input format
To set or change information:
snmp-server contact
To delete information:
no snmp-server contact
Input mode
(config)
Parameters
<Text>
Sets the contact information for the Switch used when a failure occurs on a Switch.
This information can be referenced by using the name set in
system group for inquiries from the SNMP manager.
1.
2.
Default behavior
The initial value is null.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
When information about
manager, you must use the
manager.
Related commands
None
<Text>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
Specify a character string that is no more than 60 characters. For details about
the characters that can be specified, see Specifiable values for parameters.
name
snmp-server community
,
contact
, and
location
snmp-server contact
[sysContact]
is referenced from the SNMP
command to register the SNMP
of the
629