Table of Contents
Advertisement
vlan
cannot be deleted. As the initial state of the default VLAN, all ports are access ports.
4.
The following table explains the parameter items that can be set for the default VLAN
and behavior specific to the default VLAN.
vlan
The following table applies to the
Item
Parameter
No.
<VLAN ID>
1
<VLAN ID list>
2
protocol-based
3
mac-based
4
Legend F: Can be set as a fixed value; N: Cannot be set; --: Not applicable
config-vlan mode
The following table applies to the
Item No.
Command
state {suspend |
1
active}
name
2
protocol
3
mac-address
4
Legend Y: Can be set; N: Cannot be set; --: Not applicable
5.
When the
VLAN interface by using the
using the
information. For a VLAN generated by using the
no vlan
6.
If the automatic assignment of VLANs is specified by using the
the VLAN automatically registered on the MAC port is deleted and authentication on
the applicable terminal is canceled.
142
command:
Whether specifiable by the
user
F (fixed value)
F (fixed value)
N
N
command:
Parameter
--
<string>
<Protocol name>
<MAC>
command is used to generate a VLAN, information can be set for the
vlan
vlan
command, use the
command to delete information.
vlan
command.
Behavior specific to the default VLAN
Set when the Switch is started.
Fixed to 1. Cannot be changed or deleted.
--
Port VLAN
Port VLAN
mode command.
config-vlan
Whether
specifiable
by the
user
Y
Y
N
N
command. For a VLAN generated by
interface vlan
no interface vlan
interface vlan
Behavior specific to the
default VLAN
--
--
--
--
command to delete
command, use the
no vlan
command,
Advertisement
Table of Contents
