Table of Contents
Advertisement
lldp interval-time
lldp interval-time
Sets the transmission interval between LLDP frames sent from a Switch.
Input format
To set or change information:
lldp interval-time
To delete information:
no lldp interval-time
Input mode
(config)
Parameters
<Seconds>
Sets the transmission interval between LLDP frames sent from a Switch.
1.
2.
Default behavior
30 seconds is used as the transmission interval between LLDP frames sent from a Switch.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None
Related commands
lldp run
650
<Seconds>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
5 to 32768 (seconds)
Advertisement
Table of Contents
