Web-Authentication Redirect-Mode - Alaxala AX1250S Software Manual

web-authentication redirect-mode

Sets a protocol to display the Web authentication Login page when the URL redirect
functionality is enabled.
Input format
To set or change information:
web-authentication redirect-mode {http | https}
To delete information:
no web-authentication redirect-mode
Input mode
(config)
Parameters
{ http | https }
Sets a protocol to display the Web authentication Login page when the URL redirect
functionality is enabled.


Default behavior
The Login page for https is displayed.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. All Web authentication settings take effect when the
system-auth-control
2. See Configuration commands and Web authentication modes for the authentication
mode in which the command's settings are operable.
3. This command is invalid if the
is set.
Related commands
web-authentication system-auth-control
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
http : The Login page for http is displayed.
https : The Login page for https is displayed.
command is set.
no web-authentication redirect enable
web-authentication redirect-mode
web-authentication
command
473