Table of Contents
Advertisement
hostname
Sets the identification name of a Switch.
Input format
To set or change information:
hostname
To delete information:
no hostname
Input mode
(config)
Parameters
<Name>
The identification name of a Switch. Set a name that is unique in the network that will
be used. This information can be referenced by using the name set in
the system group for enquiries from the SNMP manager. This parameter is equivalent
to
sysName
1.
2.
Default behavior
No identification name is initially set.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
When information about
manager, you must use the
manager.
Related commands
snmp-server community
<Name>
defined in RFC 1213.
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
Specify a character string that is no more than 60 characters. For details about
the characters that can be specified, see Specifiable values for parameters.
name
snmp-server community
,
contact
, and
location
[sysName]
is referenced from the SNMP
command to register the SNMP
hostname
in
617
Advertisement
Table of Contents
